IQMIX25/26/40/41
RollCall Control Panel
Issue 1 Rev 4
Page 24
© 2017 SAM
•
Logging Misc
- see section 5.13.
•
Logging SFP
- see section 5.14.
•
Logging FPGA
- see section 5.15.
•
Logging Spigot
1-x - see section 5.16.
•
Rolltrack
- see section 5.17.
•
Loopback Router
- see section 5.18
•
Setup
- see section 5.19.
•
Ethernet Front
- see section 5.20
•
Ethernet Arcnet
- see section 5.21
•
Interop
- see section 5.22
•
SFP Configuration
- see section 5.23
5.2.2 Setting Values
Many of the settings within the templates have values, either alpha or numeric.
When setting a value in a field, the value, whether text or a number, must be set by pressing
the E
NTER
key, or clicking the
Save Value
button.
Clicking an associated
Preset Value
button returns the value to the factory default
setting.
5.3 Information Display
The
Information
display pane appears at the top of each page, and shows basic information
on the input, standard and status of the module. The information to be displayed is defined on
the
SDI Selection
and
Information Select
panes to the right of the
Information
display.
5.3.1 Selecting the Information to Display
•
Select the inputs to display data for from the
SDI Selection
drop-down list.
•
Select
Video Input Status
,
Video Output Status
or
Network Status
from the
Information Select
pane as required.
The selected information will be displayed on the
Information
display pane.
Figure 14
Information and Selection Panes
