IQMIX25/26/40/41
RollCall Control Panel
Issue 1 Rev 4
Page 26
© 2017 SAM
Domain
R uses domains to partition a network; only nodes
on the same domain can communicate with one another. A
domain is uniquely identified with a number and a friendly
name/alias.
Set an ID as required, then press
Take
to confirm the
change.
Interface Configuration
Displays
the IP address for each of the Ethernet interfaces.
Card Firmware/Software
Version
Each software version contains multiple firmware images.
These allow different spigot input/output and flow standard
combinations to be selected.
Select the required software from the
Software Version
pane, then select the firmware which provides the required
combination of inputs, outputs and flow standards from the
list displayed on the
Firmware
pane.
Note
:
Restore
and
Restart
buttons are displayed only when an item not
currently installed is selected.
Click
Take
to restart the module and implement any
changes made.
Option
Operation
