IQMIX25/26/40/41
Introduction
Issue 1 Rev 4
Page 18
© 2017 SAM
1.6.2 IQFAN00 Cooling Fan Module
IQMIX25/26/40/41 cards are supplied with IQFAN00 cooling modules. Ensure these are fitted
according to the instructions below.
IQFAN00 Cooling Module
1.6.3 Fitting the Fan Module
A fan module must be fitted immediately to the left of each IQMIX card, as viewed from the
rear.
1.
Choose an empty slot position for the module, immediately to the left of the IQMIX as
viewed from the rear.
2.
Remove the screws securing the blanking plate covering the chosen slot position.
Remove and store the blanking plate in a safe place for future use.
3.
Ensuring correct orientation, fit the fan module rear connecting panel to the rear of the
enclosure in the vacant aperture, and secure with the fixing screws provided.
4.
Reattach the power supply and start up the enclosure. The fan should start
immediately.
Front
View
Rear
View
Do not run IQMIX cards without the fan modules. This can cause severe damage to
the equipment.
Before performing this operation, ensure that the power supply is switched OFF and the
mains power connection at the rear of the unit is removed.
