9
7. Insert the Change Key into the change
key hole until the key reaches the
bottom of the lock case. You may
have to wiggle the change key to get
it to engage all 3 wheels. You will
know that the key is fully inserted
when the Change Key tab is fully
inside the lock case.
8. With the change key fully inserted
through all 3 wheels, rotate the
change key 90 degrees to the left. This
unlocks the wheels and allows you to set a new combination.
9. Now with the change key unlocking the wheels, dial your new
combination to the Change Index as follows:
10. Dial 4 complete revolutions left, until you see the number 53 lined
up with the Change change key unlocking the wheels, dial your new
combination to the Index and stop precisely on the number 53.
11. Now dial to the right until the second number (23) is aligned with the
Change Index for the third time. (So pass the number 23 once, twice
and stop on the third time.) Stop precisely on this number.
12. Now dial to the left until the third number (67) is aligned with the
Change Index for Step 12: Now dial to the left until the third number
(67) is aligned with the Change Index for the second time. (So pass the
number 67 once, and stop on the second time.) Stop precisely on this
number.
13. Now on the lock side, rotate the change key back to the right to lock the
wheels at the new combination numbers.
14. Test this new combination to make sure that it works correctly, before
closing the safe door. See Dialing a Mechanical Combination.
15. Commit the new combination to memory.
OPENING WITH A MECHANICAL COMBINATION
For this example, we will assume the combination is set to 53-23-67.
1. Pull up on the SpinDial Release to disengage the electronics
2. Now rotate the SpinDial 4 full revolutions to the left (or counter
clockwise) stop when you see 53, the first number in our combination,
at the Dialing Index the fourth time. (The Dialing Index is the small red
arrow pointing to the numbers in the center of the SpinDial Release).
3. Now dial to the right until the second number (23) is aligned with the
Dialing Index for the third time. (So pass the number 23 once, twice and
stop on the third time.) Stop precisely on this number.
4. Now dial to the left until the third number (67) is aligned with the Dialing
Index for the second time. (So pass the number 67 once, and stop on
the second time.) Stop precisely on this number.
