background image

2

BOLTING DOWN YOUR VAULT 

We recommend bolting your vault to the floor using two ¼” wedge anchor 
concrete bolts through the predrilled holes in the BOTTOM of the vault.

DOUBLE SAFEGUARDING VALUABLE PAPERS 

Your SnapSafe Super Titan XL Fire Shield protection is rated at 2300ºF for 
one-hour. However, we recommend that if you are going to be putting important 
papers in the vault, you first put it in a fire resistant document box, and then put it 
in the vault.

YOUR COMBINATION CODE 

•  Your factory preset combination code is 1-2-3-4-5-6.
•  It is recorded in a small envelope wired to the door handle of your vault.  

Store this combination in a location other than your vault.

LOW BATTERY ALERT 

Your lock has a “Low Battery Alert.” If the Entry Keypad beeps repeatedly 
during an unlocking, the battery is low and needs immediate replacement.

CARE

 AND MAINTENANCE 

With a little care and maintenance your SnapSafe Modular Vault will last a 
lifetime. Keep the door hinge pins lightly greased so that the door opens 
smoothly. Vacuum the inside from time to time, and wipe down the outside 
with a soft cloth and mild detergent. Never use harsh solvents or abrasives 
on any surfaces, as they may damage the exterior finish or interior materials. 

SNAPSAFE LIFETIME WARRANTY 

Were going to take care of you. Period.

We have built products and a company we are proud of and want you  
to be as well.

If you ever experience a fire or attempted break-in we’ll repair or replace 
your vault at no charge.  

(All you have to do is to forward the report from  

the proper investigative agency.)¸

Содержание Super Titan XXL













Отзывы: