background image

Operation

17

Operation

Figure 4.  Seat Adjustment
A. Seat Adjustment Lever

Seat Adjustment

See Figure 4.  The seat can be adjusted forward and
backward.  Move the lever towards the left, position the seat
as desired, and release the lever to lock the seat into
position.

Tire

Pressure

Front

25 psi (1,72 bar)

Rear

15 psi (1,03 bar)

Figure 3.  Checking Tire Pressure

Check Tire Pressures

Tire pressure should be checked periodically, and
maintained at the levels shown in the chart. Note that these
pressures may differ slightly from the “Max Inflation”
stamped on the side-wall of the tires. The pressures shown
provide proper traction, improve cut quality, and extend tire
life.

A

Seat Adjustment (Suspension Seat)

See Figure 5.  In addition to the forward and backward seat
adjustment, models equipped with a suspension seat can be
adjusted for lumbar support, suspension and back angle. 

Forward and Backward Adjustment:

Move the forward / backward seat adjustment lever (A,
Figure 5) away from the seat, position the seat as desired,
and release the lever to lock the seat into position.

Lumbar Adjustment:

Turn the lumbar adjustment knob (B) until the desired
amount of lumbar is achieved.

Back Angle Adjustment:

Turn the back angle adjustment knob (C) until the desired
amount of back angle is achieved.

Suspension Adjustment:

Turn the suspension adjustment knob (D) until the display
scale has a reading that matches the weight of the operator.

A

B

D

C

Figure 5.  Suspension Seat Adjustment
A. Forward / Backward Seat Adjustment Lever
B. Lumbar Adjustment Knob
C. Back Angle Adjustment Knob
D. Suspension Adjustment Knob

Содержание S200XKAV2561


















































Отзывы: