background image

 

31

 

2 YEAR LIMITED WARRANTY (CZT UNITS) 

 

For two (2) years from purchase date for the original purchaser's use, 

SNAPPER

, through any authorized 

SNAPPER 

dealer will replace, free of charge (except for taxes where applicable), any part or parts found upon 

examination by the factory at McDonough, Georgia, to be defective in material or workmanship or both. 

 

For ninety (90) days from purchase date for the original purchaser's rental use, 

SNAPPER

, through any 

authorized 

SNAPPER 

dealer will replace, free of charge (except for taxes where applicable), any part or parts 

found upon examination by the factory at McDonough, Georgia, to be defective in material or workmanship or 
both 
 
All transportation costs incurred by the purchaser in submitting material to an authorized 

SNAPPER 

dealer for 

replacement under this warranty must be paid by the purchaser. 
 
This warranty does not apply to transmissions, to engines and their components, and batteries, as these items 
are warranted separately. This warranty does not apply to parts that have been damaged by accident, 
alteration, abuse, improper lubrication, normal wear, or other cause beyond the control of 

SNAPPER

. This 

warranty does not cover any machine or component that has been altered or modified, changing safety, 
performance, or durability.

 

 
Batteries have a one (1) year warranty period with free replacement if required for one (1) year from the original 
purchase date. 

SNAPPER

 will not be responsible for any installation cost incurred. The battery warranty only 

covers original equipment batteries and does not cover damage to the battery or machine caused by neglect or 
abuse, destruction by fire, explosion, freezing, overcharging, improper maintenance, or use of improper 
electrolyte. 
 
There is no other express warranty. 
 

DISCLAIMER OF WARRANTY 

Implied warranties, including those of merchantability and fitness for a particular purpose, are limited 
to two (2) years from purchase date for the original purchaser's non-rental use, and ninety (90) days 
from the purchase date for the original purchaser’s rental use, and up to the extent permitted by law 
and all implied warranties are excluded. This is the exclusive remedy. Liabilities for consequential 
damages, under any and all warranties are excluded. 
 
Some states do not allow limitations on how long an implied warranty lasts, or do not allow the 
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion 
may not apply to you. 

 
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 
 

WARNING:

 THE USE OF REPLACEMENT PARTS OTHER THAN GENUINE SNAPPER PARTS MAY 

IMPAIR THE SAFETY OF SNAPPER PRODUCTS AND WILL VOID ANY LIABILITY AND WARRANTY BY 
SNAPPER ASSOCIATED WITH THE USE OF SUCH PARTS.

 

 

IMPORTANT:

 Please fill out the attached 

SNAPPER

 Product Registration Card immediately and mail to: 

Snapper’s Product Registration Center,

 P.O. Box 1379, McDonough, Georgia. 30253

 

 

 

Содержание CZT19480KWV, CZT19481KWV, HZT2









































Отзывы: