Snapper 400ZB2548 Скачать руководство пользователя | Manualshive

Страница: 26 / 48

background image

24

www.SnapperPro.com

Lubrication

Lubricate the unit at the locations shown in Figures 20
through 23 as well as the following lubrication points.

Grease:

  • front caster wheel axles & yokes
  • deck lift pivot blocks
  • mower deck spindles
  • mower deck idler arm

Use grease fittings when present. Disassemble parts

to apply grease to moving parts when grease fittings are not
installed.

Not all greases are compatible. Red Grease (p/n 5022285)
is recommended, automotive-type high-temperature, lithium
grease may be used when this is not available.

Oil:

  • control handle pivots
  • seat plate pivots
  • deck lift pivots
  • discharge chute hinge

Generally, all moving metal parts should be oiled where
contact is made with other parts. Keep oil and grease off
belts and pulleys. Remember to wipe fittings and surfaces
clean both before and after lubrication.

Lubricating the Front Casters:

NOTE: Front casters should be lubricated annually.

1. Remove the 1/4-28 bolt (A, Figure 23) screwed into the

front caster and install a 1/4-28 grease fitting.

2. Grease the front caster.

3. Remove the 1/4-28 grease fitting and reinstall the 1/4-28

bolt.

4. Repeat process for the other side of the machine.

Figure 20. Deck Lubrication

Figure 22. Deck Lift Linkage Pivots

Figure 23. Front Caster & Wheel
A. 1/4-28 Bolt

Figure 21. Control Handle Pivots & Seat Plate Pivots

A

Regular Maintenance

Not

for

Reproduction

«
...
24
25
26
27
28
...
»

Содержание 400ZB2548

















































Отзывы:

Нет отзывов

Похожие инструкции для 400ZB2548

Бренд: Walker Страницы: 100

Бренд: Land Pride Страницы: 60

Бренд: Simplicity Страницы: 32

Бренд: Yard-Man Страницы: 42

Бренд: Simplicity Страницы: 14

Бренд: Poulan Pro Страницы: 28

Бренд: Worldlawn Страницы: 19

Бренд: Lawn-Boy Страницы: 29

EcoCut 135 Z-042

Бренд: Talex Страницы: 164

Бренд: Stiga Страницы: 64

Бренд: Kubota Страницы: 24

Бренд: Jonsered Страницы: 9

Бренд: Jonsered Страницы: 68

Бренд: Jonsered Страницы: 18

Бренд: Jonsered Страницы: 10

ZERO TURN TP 400-2169-01-ZT-SMA

Бренд: Simplicity Страницы: 46

Бренд: Tarmo Страницы: 7

Бренд: ST. SpA Страницы: 61

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды