Snapmaker A350T, Быстрый старт

Страница: 48 / 51

88
|
Quick Start Guide
|
89
CNC Carving
How It Works: Work Origin
Find out where the carving will take place by setting the Work Origin. The Work Origin corresponds to the (0, 0)
coordinate origin in the software.
5.3.2 Set the Work Origin and Start Carving
Guides & Pictures / Snapmaker
How to Set the Work Origin
1. After receiving the G-code file, tap Disconnect on the Touchscreen. Then find and select the received G-code
file, and tap Next to enter the Set Work Origin screen.
2. Tap X- , X+ , Y- , Y+ , Z- , or Z+ to move the CNC Bit to where the Work Origin will be (In this case, we set the
center of the image as the coordinate origin in the software). Now the CNC Bit should be about 5 mm away
from the material.
If you need to adjust settings, you can either tap Adjust Settings on the Preview screen or
swipe left on the carving progress screen.
5 mm