8
Luma 500/700 Series Dome IP Camera
Installation with an NVR
If you are installing with an NVR, follow these instructions. Otherwise,
follow the instructions starting on the next page.
1. Ensure your NVR has the latest firmware. If it does not, your NVR
may be unable to locate and activate your camera.
1. Perform the physical installation of your camera by following the
instructions given on pages 13–15.
2. Plug your camera into your recorder. The NVR autodetects your
camera, activates it (giving it the same admin password that it has),
and assigns it an IP address.
3. Complete the installation using the instructions given in your
NVR manual. You do not need to continue using this guide.
Where
possible, we recommend changing settings using your NVR.
4. Optional: This camera has a few features that are not available
on your NVR: line crossing and area intrusion. After completing
installation, see the camera’s web interface manual to set these up.
