14
Luma 500/700 Series Dome IP Camera
Weatherproofing the PoE Cable
1. Before terminating the RJ45 cable
, slide it through the lock nut
,
the thick rubber gasket
, and the weatherproof endcap as shown.
Be sure the notched side of the rubber gasket
faces toward the
endcap, as shown in the diagram to the left.
2. Terminate the RJ45 cable
with a network plug
.
3. Place the O-ring
onto the end of the camera’s network interface
socket
with the flat side toward the camera. Push it past the
locking teeth as far as it easily goes.
4. Connect the RJ45 plug
to the camera’s network socket
.
5. Align the teeth on the weatherproof endcap
with the gaps on the
camera’s network interface socket
, then insert the socket into the
endcap. Twist until they click into position (the O-ring
gives you
a little flexibility while still weatherproofing the connection).
6. Slide the thick rubber gasket
into the weatherproof endcap
,
and secure it by screwing the lock nut
tightly onto the endcap
.
