13
Luma 500/700 Series Dome IP Camera
Physical Installation
1. Drill pilot holes for your screws in the mounting surface, using the
supplied template.
2. CAUTION! Before terminating your RJ45
for an outdoor install, you
must weatherproof it! See the next page for details.
3. Attach power to the camera.
}
If using PoE,
attach the RJ45 cable to the connector.
}
If using 12V DC
, locate the red and black wire bundle. Attach the
hot line to the red wire, and the ground to the black wire.
4. Attach the base of the camera to the mounting surface and secure it.
