Snap-On EEWH329A, Руководство по эксплуатации

Страница: 6 / 78

6
Snap-On EEWH329A
Tires and rims that are not the same diameter are mismatched.
•
NEVER attempt to mount or infl ate any tire and rim that are mismatched.
•
ALWAYS check to see that tire and rim diameters are the same.
A mismatched tire and rim could explode causing death or serious personal injury.
Over-pressurized tires can explode causing fl ying debris.
•
Read and understand Operator’s Manual before operating.
•
Keep bystanders away from work area.
•
ALWAYS wear Safety Goggles.
•
ALWAYS check to see that tire and rim diameters are the same.
•
NEVER attempt to mount or infl ate any tire and rim with different diameters.
•
Inspect tires. NEVER infl ate tires that are damaged, rotten or worn.
•
NEVER infl ate ‘Split Rim Wheels’ on this tire changer or remove them and use only
an approved safety infl ation cage designed for this purpose.
•
Lock turntable clamp on inside of rim before attempting to infl ate tire.
•
Use approved tire bead lubricant before removing or installing tire on rim.
•
ALWAYS position the “Safety Restraint Arm” over the wheel to hold it to the
turntable while infl ating if so equipped.
•
If a tire explodes on this tire changer, STOP using it until the “Safety Restraint
Arm” has been replaced, which must be done even if no damage is seen.
•
NEVER place head or body over a tire during infl ation process.
•
Use short bursts of air to seat tire beads. Check tire air pressure
frequently. NEVER exceed tire manufacturer’s pressure limits.
•
NEVER attempt to bypass or alter the built-in air pressure limiter. Only infl ate tire
with air hose supplied with tire changer. NEVER use shop infl ation hose to infl ate a
tire.
•
Tire Changer must be anchored to concrete fl oor if equipped with a “Safety
Restraint Arm”.
Exploding tires can cause serious injury.