Snap-On EELR 343A, Инструкция по установке и эксплуатации

Страница: 18 / 29

17
Figure 13 – Crossmember Leveling Figure 14 – Tower Leveling
Figure 15 – Shim Placement
Figure 16 – Anchor Installation
3. Refer to Bay Layout (Figure 3) to ensure that the column is still in the proper
position. Using a rotary hammer drill with a ¾” masonry drill bit, drill holes in
the floor on the high side column using the tower baseplate as a template. Make
sure that the ¾” masonry drill is in good condition
(Figure 16A) .
4.
Carefully clean out drilling dust from the anchor holes. Hammer in the anchor
bolts
(Figure 16B) . Hand tighten all anchor bolts.