manualshive.com logo in svg

Snap-On ECKO, Руководство пользователя

Поделиться
Скачать
Snap-On ECKO Скачать руководство пользователя страница 7

ZECKOROLL 

REV ‘A’ 

OCT 2018

14

7

Setting Up ECKO Remote Lock 

Each remote lock equipped TSU comes pre-pro-

grammed from the factory with the drawers 

locked.  Follow these steps to setup your ECKO 

remote lock for the first time:

1. Unlock the TSU using the procedure outlined 

in the manual unlocking/locking section of this 

manual. 

2. Locate your AC/DC adapter and plug into 

an electrical outlet that is properly installed and 

grounded.

3. Plug the round DC end of the adapter into 

the jack on the back of the TSU.

4. Use remote to lock or unlock the TSU as 

explained in the remote section of the manual.

Remote Use

The remote is a three button design similar to an 

automotive remote. 

- Press lock key (1) 1-3 seconds to lock - 1 beep 

will sound

- Press unlock key (2) 1-3 seconds to unlock - 2 

beeps will sound

- Auxiliary (ACC) key is for future use

- If red LED does not turn on when pressing lock 

or unlock, battery may be low

Maintenance

Remote Battery Replacement

1. Locate keyway location on remote case. 
2. Using small flat head screwdriver (or equiva-

lent), separate two halves of remote case.
3. Remove battery (CR2032) out of its holding 

bracket.
4. Slide new battery into holding bracket with posi-

tive (+) side up.
5. Reassemble remote case by pressing two 

halves firmly together.

Содержание ECKO












Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды