Snap-On ECKO, Руководство пользователя

Страница: 4 / 11

ZECKOROLL REV ‘A’ OCT 2018
14
4
If your tool storage unit has swivel-locks, be sure lock the swivel
caster wheels parallel to the front of the roll cab prior to opening
any drawers. Do not open any drawer with swivel caster posi-
tioned inward.
Do not pull.
Push to move.
Swivel Casters
Units can tip or strike you.
• Close lid and lock drawers before moving
• Apply brakes on casters when not moving unit
• Do not open any drawer with swivel caster positioned
inward
Tipping of storage unit or unit striking you can cause injury.
Risk of electric shock and fire.
• Disconnect or unplug all power cords and cable assem-
blies before moving unit
Electric shock or fire can cause injury.
Rigid casters. If
swivel casters, lock
swivel casters oppo-
site handle prior to
moving.
Do not pull. Push to move. If your tool storage unit comes with all
swivel casters, use the swivel-lock pin to lock the two swivel cast-
ers opposite the handle as shown before attempting to move. If
your tool storage unit comes with two swivel and two rigid caters,
install handle on the same side as the swivel casters.
MOVING & STORAGE INSTRUCTIONS
Close and lock all drawers, doors, and lids and lock unit prior to moving.
Disconnect or unplug all power cords and cable assemblies prior to moving
unit. Keep these cables safely stored away from roll cab when moving.
When not moving roll cab, be sure to apply all brakes. Be sure to lock front
caster wheels parallel to the front of the roll cab prior to opening any draw-
ers. Do not open any drawer with swivel caster facing inward.
Casters will swivel with
swivel lock pin locked in
the outward position as
shown.
Casters will not swivel
when swivel lock pin
is locked in the inward
position as shown.
Units can tip or strike you.
• Apply brakes on casters when not moving unit
• Do not open any drawer with swivel caster positioned
inward
Tipping of storage unit or unit striking you can cause injury.
MOVING & STORAGE INSTRUCTIONS
CONT.
Casters can be converted from swivel to rigid by pulling and rotating
the swivel lock pin.
Casters can be locked and unlocked by applying pressure to the
caster brake. The brake on the caster stops the caster wheel from
rolling when pressed down in the locked position. When lifted up,
the caster will be unlocked and the wheel will be able to roll.
When brake is compressed,
caster wheel will be in the
locked position and will be
unable to roll.
When brake is in the up
position caster wheel will
be in the unlocked position
and will be able to roll.