ZECKOROLL
REV ‘A’
OCT 2018
14
3
INSTALLATION INSTRUCTIONS
Do not install or store this product where it will be exposed to rain,
snow, or wet conditions.
Risk of electric shock and fire.
•
Do not expose to rain, snow, or wet conditions
Electrical shock or fire can cause injury.
Do not expose this unit to flammable fuel or vapors. This unit
contains internal parts that arc or spark, which could cause fuel or
vapors to ignite. Do not install or store this equipment in a recessed
area or below floor level, where vapors can accumulate. Locate all
electrical components stored within this equipment at least 460 mm
(18 inches) or more above floor level.
Risk of explosion.
•
Flammable fuel or vapors can ignite
•
This equipment should not be located in a recessed area
or below floor level
•
Powered worksurface and power drawer have internal
arcing or sparking parts
•
Do not expose to flammable vapors. Powered worksurface
and power drawer components to be mounted at least 460
mm (18 inches) or more above the floor.
Explosion or flame can cause injury.
LOADING INSTRUCTIONS
Drawers are designed to support heavy loads. Care should be
taken to uniformly load your tool storage unit. When adding tools
and other items to the drawers, load each drawer with no more
than 15 lbs at a time. After adding up to a 15 lb load, close drawer
and proceed to the next one. Repeat this process until all drawers
have been uniformly loaded with the desired contents. Items that
weigh more than 15 lbs should be added after all other drawers are
loaded and closed.
Units can tip or strike you.
•
Do not open more than one drawer at a time
•
Apply tool load in up to 15 lb (max) increments.
•
Before adding more than 15 lbs to any drawer, all other
drawers should be loaded and closed.
•
Load items weighing more than 15 lbs last.
•
Apply brakes on locking casters.
•
Do not open any drawer with swivel caster positioned
inward.
Tipping of storage unit or unit striking you can cause injury.
Risk of electrical shock and fire.
•
12A maximum cumulative load for all recepticles
Electrical shock or fire can cause injury.
Risk of electric shock and fire.
•
Do not operate with damaged cord or plug
•
Replace damaged cord or plug immediately
Electrical shock or fire can cause injury.
Periodically inspect all external cords and plugs for damage
or wear. Replace damaged or worn cords immediately.
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or
break down, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock. This
product is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and
ordinances.
Improper connection of the equipment-grounding
conductor is able to result in a risk of electric shock.
Check with a qualified electrician or serviceman if
you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the
product – if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
Risk of electric shock and fire.
•
Do not remove the ground connection
Electrical shock or fire can cause injury.
INSTRUCTIONS PERTAINING TO
RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS
To reduce the risk of electric shock and fire, never overload
receptacles. Refer to the markings at the receptacles for
proper loading of receptacles.
IMPORTANT SAFETY INSTRUCTIONS CONT
This document contains important safety and operation instructions for tool storage units. Refer to this information often for safe usage
and operation.
SAVE THESE INSTRUCTIONS
Содержание ECKO
Страница 1: ...ZECKOROLL REV A OCT 2018 14 1 ...
