10
Selecting correct driver bit/socket bit
.
Always use the correct size driver bit/socket bit. Use only the driver bit/socket bit shown in below
picture. Do not use any other driver bit/socket bit.
.
An incorrect size bit will result in inaccurate and inconsistent fastening torque and /or damage to
the bolt or nut.
Installing or removing driver bit
.
To install the driver bit, pull the sleeve in the direction of the arrow and insert the driver bit into the sleeve as far
as it will go.
.
Then release the sleeve to secure the driver bit.
.
To remove the driver bit, pull the sleeve in the direction of the arrow and pull the driver bit out.
Switching on/off
The impact driver is started and stopped by depressing and releasing the ON/OFF switch trigger.
Switch lock
.
The switch trigger can be locked in the center position.
.
This helps to reduce the possibility of accidental starting when not in use.
.
To lock the switch trigger, place the direction of rotation selector in the center position.
Direction of rotation
.
Direction of rotation is controlled by the direction of rotation selector located above the switch trigger.
.
Clockwise rotation—right: to select forward rotation, release the on/off switch and push the forward/reverse lever
to the left side of the tool.
.
Anticlockwise rotation—left: to select reverse rotation, push the lever to the right side of the tool.
0.39in
0.35in
