11
Variable speed
.
This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure.
.
Speed is controlled by the amount of switch trigger depression.
LED light
The LED work-light can light prior to motor running if you press the switch lightly, which keep the work area to be
lighted for checking clearly at first, and it lights also during your operation.
WARNING:
Do not stare directly at the light beam. Never aim the beam at any person or an object other than the work
piece.
WARNING:
Do not deliberately aim the beam at personnel and ensure that it is not directed towards the eye of a
person for longer than 0.25s.
MAINTENANCE
.
Store the tool, instruction manual and accessories in a secure place. In this way you will always have all the
information and parts ready to hand.
.
Keep the tool’s air vents unclogged and clean at all times.
.
Remove dust and dirt regularly. Cleaning is best done with compressed air or a rag.
.
Never use caustic agents to clean plastic parts.
CAUTION:
Do not use cleaning agents to clean the plastic parts of the tool. A mild detergent on a damp cloth is
recommended. Water must never come into contact with the tool.
