Smokeeter SE 10, Руководство пользователя

Страница: 9 / 16

8
3. To measure the collection cell output voltage, place
the probe’s tip on the cell high voltage contact.
• Output without the unicell should read 5.0 to 6.5 KV
DC positive.
CHECKING LAMP VOLTAGE
1. Check power supply output lamp output by con-
necting a good 2 volt lamp.
2. Check lamp operation with 1.5 volt battery as
shown in Figure 8.
VIII. REPLACEMENT PARTS
Replacement parts can be ordered from your local
distributor or from UAS. To order parts from UAS,
call or write:
UNITED AIR SPECIALISTS, INC.
4440 CREEK ROAD
CINCINNATI, OHIO 45242
1-800-551-5401
ATTN: SMOKEETER/CRYSTAL-AIRE
CUSTOMER SERVICE
The following information will be required for prompt
service:
1. Unit Model No. on bottom of base unit at air
mover end.
2. Unit Serial No. on bottom of base unit at air mover
end.
3. Part No. of part (see Section IX, Illustrated Parts).
When returning a defective part under warranty, you
must call UAS for a customer return authorization
number. This number should appear on the package
that is being returned. With this control number, we can
assure you will receive prompt service. You can also
return defective parts to your local distributor.
FIGURE 7
FIGURE 8