Smokeeter SE 10, Руководство пользователя

Страница: 4 / 16

3
I. INTRODUCTION
Your new air cleaner is the most advanced product of
its type on the market today and will provide a safer,
healthier environment. As you begin its operation, we
would like to remind you of a few important facts.
First, we appreciate your business, and because we
appreciate your business, we have manufactured an air
cleaner engineered to rigid specifications, incor-
porating the latest technological advances. It is built
using the best materials available and is subjected to
rigorous quality control checks. A warranty backs
every air cleaner that leaves our factory.
Second, like any piece of equipment, your air cleaner
needs periodic maintenance. Properly cared for, it will
operate at peak efficiency for many years to come.
Finally, while we hope you never have any problems,
United Air Specialists, Inc. (UAS) is always ready to
lend assistance through our factory-trained sales-
people. Should you need information or service, con-
tact your local salesperson or the Customer Service
Department at United Air Specialists, Inc., 4440 Creek
Road, Cincinnati, Ohio 45242, 1-800-252-4647.
II. INSPECTION OF EQUIPMENT
Upon receipt of your SMOKEETER/CRYSTAL-
AIRE, check for any shipping damage. A damaged
carton indicates that the equipment may have
received rough handling during shipping that may
have caused internal damage. Notify your delivery
carrier and enter a claim if any damage is found.
Before operating unit, remove all packing material
including carbon afterfilter, packaging and unicell
shipping screws.
III. HOW YOUR SMOKEETER/
CRYSTAL-AIRE OPERATES
The air mover draws air through the ionizer. As par-
ticles pass through the ionizer section, they are given
an intense positive charge. These charged particles
are then collected on cell plates. The clean air is
redistributed into the room through an outlet diffuser.
An activated carbon afterfilter helps control odors
in the air.
COMPONENTS MAKE IT WORK
(See Figure 1)
1. UNICELL is comprised of the ionizing section and
the collecting section. The ionizing section is made
of fine tungsten wires supported between metal
plates. When high voltage is applied to these
parts, a “corona” field is generated, imparting a
high voltage charge on particles that pass through
it.
The collection section is made up of a series of flat
metal plates. These plates act like a magnet and at-
tract the charged particles, removing them from the
air. The plates are alternately charged positive and
ground. The positive plates repel the particles while
the ground plates attract them, yielding a very high
efficiency.
2. ACTIVATED CARBON AFTERFILTER helps remove
odors in the air.
3. POWER PACK is a dual high voltage supply. It sup-
plies 12,000 volts DC to the ionizer and 6,000 volts
DC to the collection cell.
4. SOLID-STATE SPEED CONTROL (not shown) allows
airflow adjustment.
5. AIR MOVER is a three blade fan designed for quiet
operation. The motor features an automatic reset
thermal protector.
FIGURE 1