Smoke hollow 7000CGS, Сборка и эксплуатация

Страница: 18 / 28

18
Assembly
Step 20: Attach Charcoal Damper Handle
Locate : Charcoal Damper Handle
Procedure :
Screw the handle into the hole located above
the vertical slots on the charcoal side of the
grill. The handle should slide back and forth
to open and close the damper.
Step 20
Step 21: Install Warming Rack
Locate : (2) Warming Rack and (4) M6x25
bolts
Procedure : To attach the warming rack, insert
(1) of the M6x25 bolts through the lid from the
outside as shown in Figure 21A and position
the warming rack so that the bolt is going
through the wire loop as shown in Figure 21B.
Then align the wire loop on the opposite end
of the warming rack with the opposite lid hole
and insert the other M6x25 bolt.
Insert the wire legs into the holes on the sides
of the cabinet as shown in Figure 21C.
Step 21 Fig. 21A
Fig. 21B
Fig. 21C