13
Assembly
Step: 11 Install Firebox Support Brace
Locate
: Firebox Support Brace, (4) M6x15
bolts and (4) M6 KEPS nuts.
Procedure
:
Place the firebox support brace between the
legs on the right end of the grill so that the
ledge is at the bottom and facing to right as
shown in Figure 11. Insert M6x15 bolts
through the legs and then through the brace
as shown. Attach M6 KEPS nuts on the
inside and fully tighten
.
Step 12: Attach Firebox to Charcoal Side
of Cabinet
Locate
: Firebox Assembly (Part #18), (6)
M6x15 bolts and (6) M6 KEPS nuts.
Procedure
:
Align firebox assembly with rectangular hole in
right side of cabinet so that it is resting on the
ledge of the firebox support bracket. Insert (3)
M6x15 bolts through the firebox and cabinet
wall. Then attach an M6 KEPS nut to each of
the (3) bolts.
Insert (3) M6x15 bolts through the firebox and
firebox support brace. Then attach an M6
KEPS nut to each of the (3) bolts. Make sure
the (6) M6x15 bolts are fully tightened.
Step 11
Step 12
Fig. 11
Lock nut
Fig. 12
Fig. 13
Step 13: Attach Firebox Door Handle
Locate
: Firebox Door Handle (Shown in
Figure 13), (1) M6x15 bolt and (1) M6 metal
lock nut.
Procedure
:
Place firebox door handle on the outside of
the firebox door and insert an M6x15 bolt
through the door handle and door as shown.
Attach an M6 metal lock nut and tighten using
an adjustable wrench or pliers.
Ledge
Firebox
door handle
