Smithy MI-1440L Скачать руководство пользователя

Страница: 5 / 62

Introduction

Welcome

To the manual for the Smithy MI-1440L lathe. It will teach you about the

parts of the machine and how to take care of your investment. This manual

is complete and current at the time of printing*. In our continuing effort to

bring you the best in machine tools, changes may be made - please visit us

www.smithy.com

for the latest updates.

This manual—and any other manuals associated with this Smithy machine—

should remain with the machine. If ownership changes, please include the

Operating Manual with the machine.

Please read the operating manual carefully and closely. Follow the

procedures described. If you don’t understand how your machine works, you

risk injury to yourself or others. Misuse can cause damage to the machine or

to your project. To learn more about general machining practices you can

turn to a number of sources. The Smithy website has a series of Machinist

Training Videos under the Machining Helps section of website heading.

Smithy also offers books that meet the needs of Congratulations on the

purchase of your Smithy Milling Machine. We welcome you to the Smithy

family of quality machine owners. Smithy strives to provide you with the best

in machines and service. Please read through this manual carefully to ensure

that you achieve maximum performance from your MI-1440L lathe.

We also suggest your local library as a resource. Enrolling in a machining

class will give you the best opportunity to learn about machining from

professionals in a supportive environment.

Suggestions or Comments

We are interested in any suggestions you might have to improve our
products and services. Feel free to contact us with your suggestions by
phone or in writing. If you have comments about this operator’s manual, or if

Содержание MI-1440L































































Результаты поиска

Содержание MI-1440L

Отзывы:

Похожие инструкции для MI-1440L

Бренды по названию

Популярные бренды

Smithy MI-1440L, Руководство оператора

Результаты поиска

Содержание MI-1440L

Отзывы:

Похожие инструкции для MI-1440L

Бренды по названию

Популярные бренды