Smithy MI-1440L, Руководство оператора

Страница: 37 / 62

11.
Do not disengage the halfnut until the thread is
finished.
All mechanical connections must stay intact for metric
threads. If the thread is to be cut in multiple passes,
12.Turn the spindle off with the motor fwd/rev lever.
13.Back the cutter away from the workpiece.
14.Reverse the spindle motor and power back to the start of the tread.
15.Shut the motor off and reset the thread depth.
16.Repeat steps 12 through 15 until the thread is the desired depth.
Chapter 11
Work Holding Devices
The spindle nose and chuck mounting is a D1-5 Type. This is one of the
industry standard mounts and makes it possible to mount numerous styles
and types of chucks to your machine.
The chuck is attached to the spindle nose by 5 cam locks and studs.
Chuck and Face Plate Removal
4. To remove the lathe chuck, place a piece
of wood under the chuck to protect the
machine bed if the chuck should drop.
5. Rotate each cam on the spindle
counterclockwise until the scribe mark
on the cam aligns with the mark on the
spindle .
6. If the chuck is stuck onto the spindle, a
light hit with a mallet or dead blow
hammer will knock it loose.
37