PLEASE DO
- Use spanner to tighten all gas fittings
- Check all gas hose and line connection for damage, cuts or cracks each time for using the appliance.
- Always leak test with soapy water
- Check all burners regularly for insect nets such as spiders, ants, etc. Nets are dangerous and need to
be fully cleaned.
- Have the gas cylinder filled by an authorized gas supplier
- Always wear protective gloves when handling hot component
- Clean and maintain the appliance after each using.
- USE BBQ at least 1.5 m from any wall or surface, combustible material, gasoline, flame liquids or
vapors
-
“Burning off” the
appliance after every use (for approx 15 minutes) will keep excessive food residue to
a minimum.
PLEASE DO NOT
- Lean over appliance when lighting
- Store combustible material, gasoline or flammable liquids or vapors within vicinity of appliance
- Use appliance with any cover on
- Use plastic or glass utensils on the appliance.
- Use the appliance in strong winds
- Dismantle control valves
- Test for gas leaks with a naked flame
- Lay the gas cylinder down (always keep upright)
- Use appliance indoors
- Modify the constructions of the appliance or the size of any burner, injector orifice or any other
components
- Move the appliance during using
- Obstruct any ventilation of the appliance
- Allow the flexible gas supply hose or any electrical cord to come in contact with any heated surface of
the appliance
- Use charcoal or any other solid fuel in this appliance
- Disconnect any gas fittings while the appliance is in using
- Use a rusty or dented gas cylinder with a damaged gas valve
- Fill the gas cylinder beyond 80% cap
- Touch the hood surface while in use or while hot.
Connection to the Appliance
Before connecting, please ensure there is no debris caught in the head of the gas cylinder, regulator, burner and
burner parts.
If the hose is replaced, it must be secured to the appliance and regulator connections.
After connecting,
GAS LEAKGE CHECKING
is a must. Please follow following method to check for gas leakage.
-
Ensure the control valve is “OFF”.
- Connect the cylinder to the regulator, regulator to hose and hose to the appliance, ensure the connections are
secured then turn ON the gas.
- Brush the soapy water on the hose and all joints. If bubble appears, it means there is leakage. You have to reconnect
