12
13
smithandnoble.com
800.248.8888
INSTALL SOLAR PANEL
Tape Method
Cut the tape to fi t inside the white
border as shown. Clean the ends of the
solar panel where the tape will go with
rubbing alcohol. When dry, remove the
release liner from one side of the double
sided tape and adhere them to face of the
panel.
Make sure to put the tape on the face
(black side) of the panel.
Clean the window surface with rubbing
alcohol. When dry, remove the release
liners and att ach the solar panel to the
glass, pressing fi rmly to adhere.
Note:
It is important to clean both
surfaces with alcohol as debris or oils will
compromise the bond.
Double sided tape can be removed from
the window surface by using a fl at razor
knife. Adhesive residue can be removed
by using a liquid adhesive remover.
Bracket Method
If using brackets, set the bott om groove
of the unit onto the bott om bracket hook.
Then press the top of the unit unti l it
snaps into place.
If space is limited it may be easier to
att ach the brackets to the solar unit
before screwing the brackets in place.
DOUBLE SIDED
TAPE
SOLAR PANEL RECHARGE UNIT
BRACKET
BOTTOM
BRACKET
HOOK
SOLAR
PANEL
BOTTOM
BRACKET
HOOK
BRACKET
SOLAR
PANEL
Determine Solar Panel Placement
The solar panel should be placed where it
gets the maximum amount of sunlight per
day.
In most cases, this can be achieved by
mounti ng the unit directly to the glass with
double sided tape.
Brackets are provided if att aching to the
glass is not possible.
The brackets may be mounted several
diff erent ways depending on the applicati on
(window depth, window width, etc.).
The unit requires 19" minimum window
width to mount horizontally.
Inside Mount
Bracket can be mounted behind or next to
shade mounti ng bracket.
Inside Mount Extended
Bott om porti on of the bracket may be
lowered if needed for more sun exposure.
Bracket can be mounted behind or next to
shade mounti ng bracket.
Note: only two of the holes are threaded.
Inside Mount with Top Reversed
The top porti on of the bracket may be
reversed if necessary depending on space.
Bracket can be mounted behind or next to
shade mounti ng bracket.
Outside Mount
This method will provide the least amount
of sun exposure. Bracket can be mounted
next to shade mounti ng bracket.
INSIDE MOUNT
INSIDE MOUNT EXTENDED
INSIDE MOUNT WITH TOP REVERSED
OUTSIDE MOUNT
SOLAR PANEL
(OPTIONAL)
