POSYC 4301/4302/4303 series industrial PCs
Installation, use and maintenance manual - EN
Rev. 1.02
31
8 Use
8.1 Touch screen
The use of the POSYC computer is very similar to a normal desktop computer; the only substantial difference
is the touch screen pointing device which, however, allows an even more intuitive use of the computer.
CAUTION
ATTENTION
To operate the touch screen, a slight pressure is sufficient (this has the appearance of any glass plate) to com-
mand the operating system pointer to move below the area where the pressure has been exerted. Depending
on the software settings, the touch screen simulates dragging, clicking, double clicking and right mouse button.
Refer to the software manual for further details.
8.2 Front USB ports
The front USB ports have been designed to connect temporary devices such as keyboards and flash disks; the
seat of the USB connectors ensures the IP65 degree of protection towards the inside of the computer both in
use and in rest conditions.
CAUTION
Operate the touch screen sensor only with your fingers or soft and not sharp objects, other-
wise you will damage it.
Utilisez le capteur d'écran tactile uniquement avec vos doigts ou des objets mous et non
tranchants, sinon vous risqueriez de l'endommager.
To avoid oxidation damage to the contacts of the front USB connectors, once the use is fin-
ished protect them again with the special cap to protect them from dust and dirt. The cap
does not guarantee IP65 protection to the USB connectors.
