Smirnov Electronics | WhammyD 2 | User Manual EN
© 2013 SMIRNOV ELECTRONICS 33
In modes
Arpeggio
you can use the following values of the field
Switch
:
o
Normal
– parameter indicating that step -‐ normal note arpeggios.
o
Sweep
– parameter indicating that step -‐ sweep-‐note arpeggios. For specified
for the duration of this step, the shift varies linearly from zero to a maximum
and back to 0.
o
Saw
– parameter indicating that step -‐ sweep-‐note arpeggios. For specified
for the duration of this step, the shift varies linearly from zero to maximum.
o
Back Saw
-‐ parameter indicating that step -‐ sweep-‐note arpeggios. For a
specified duration for this step, the shift varies linearly from maximum to
zero.
o
Pause
– parameter indicating that step -‐ a marker
Pause
. Suspends execution
arpeggios before pressing
A
.
o
Fixed
– parameter indicating that it is -‐ for a fixed step preset footswitch type
or sets fixed shifts.
o
Stop
-‐ parameter indicating that step -‐ a marker
Stop
. Stops the execution of
the arpeggio, arpeggio resets at the beginning of on and off the pedal.
o
Loop
-‐ parameter indicating that step -‐ marker
Loop
. When it achieving the
execution proceeds to the first step preset.
6.
Direct the marker on the
Step
and proceed
to the next step (Step No.
2
).
7.
Set the preset Digitech Whammy, in which
will shift to the right interval for step
number 2. For shift of the octave up,
exhibiting preset Digitech Whammy
é
OCT.
