Smirnov Electronics | WhammyD 2 | User Manual EN
© 2013 SMIRNOV ELECTRONICS 13
Enable / disable transmission
MIDI Active Sense
messages by pedal in a Master mode. Messages
are sent once in a 250ms, in the absence of other
posts on MIDI-‐line, to confirme the correct
functioning of MIDI-‐line on other devices and to
automaticaly determine the Master / Slave
devices on Smirnov Electronics’ devices.
IMPORTANT:
Receiving messages in Slave mode
can not be disabled.
Turn Protect.
Enable / disable the WammyD2
against accidental pressing protection. When off,
the pedal will be included protection from a brief
button press
A
or
B
to the standard mode, and
from long pressing the
A
button on the menu
Options
. When security is enabled, the pedal will
be included on a long push on both the
A
and
B
in
the standard mode, and by long pressing the
A
button on the menu
Options
.
3.6 Exit menu Options
Once you have made all the necessary settings in the
Options
menu, you can get out of it by
following these instructions:
1.
Press and hold buttons
A
and
B
.
2.
When the pedal begins to restart, release both buttons to prevent re-‐entering the
Options
menu.
