Smirnov Electronics | WhammyD 2 | User Manual
12 © 2013 SMIRNOV ELECTRONICS
Setting the
System Exclusive ID
of a device.
SysEx ID value is used primarily for service use of
the program synchronization with Smirnov
Electronics Stompbox. You can change this value
from 1 to 127.
IMPORTANT:
It is advised that this parameter is
changed by advanced users only..
Setting the current
model of Digitech Whammy
,
with which will work WhammyD 2. You can chose
the IV, V and DT values corresponding with
Digitech Whammy 4, Digitech Whammy 5 and
Digitech Whammy DT. Set this parameter to
ensure the correct settings with your Digitech
Whammy model.
IMPORTANT:
For each model Whammy
WhammyD controller 2 uses its own set of
presets, therefore, change of the presets for one
Whammy model will have no effect on other
models.
Enable / disable
THRU -‐ bypass
mod for Digitech
Whammy 4.
IMPORTANT:
This step is only applicable for the
Whammy -‐ Whammy IV type.
IMPORTANT:
Enabling this option changes the A
key principle of operation for presets footswitch. A
button works only as on / off Digitech Whammy 4.
Enable / disable transmission pedal
MIDI Clock
messages mode Master.
IMPORTANT:
Receiving messages in Slave mode
and tempo sync according to these reports can not
be disabled.
