Smirnov Electronics | WhammyD 2 | User Manual EN
© 2013 SMIRNOV ELECTRONICS 23
Exit programming mode.
To exit the programming mode, perform the following steps:
1.
While in programming mode,
simultaneously press and hold buttons
A
and
B
for about 1.5 -‐ 2 seconds. Once the
menu appears exit the programming
mode, release both buttons.
2.
If you want to save changes to preset
changes, select knob Preset Change item
YES
. Otherwise case, leave the marker at
the point
NO
.
3.
Briefly press button
A
or button
B
. If you select
YES
, the modified preset stored in
memory storage WhammyD 2 presets and preset download updates. If you select
NO
, the changes are not saved after exiting in the base mode is loaded with the
current preset number unchanged.
Next consider the features of programming each of the three presets:
o
Programming presets type
Footswitch
(presets 3 -‐ 5).
o
Programming presets type
Fixed
(6 presets -‐ 10).
o
Programming presets type
Arpeggio
(presets 11 -‐ 56).
