10
Instructions for the user
4.1
Description of the controls on the front panel
4.1.1 Programming clock
The programming clock allows to display the current time or to set a timer or a
programmed cooking operation.
4.1.2 Temperature selection knob
The cooking temperature is selected by turning the knob clockwise to the required
setting, between
50°
and
280°C
.
When the knob is turned, the indicator light starts flashing to signal the oven is
preheating. When the selected temperature is reached, a buzzer will sound and the
light will stop flashing and remain lit. If the temperature changes, the light starts
flashing again.
In pyrolitic models, the light switches on when the automatic cleaning cycle
(pyrolysis) starts and remains lit until the cycle is complete.
4.1.3 Function selection knob
The oven's various functions are suitable for different cooking modes. After
selecting the required function, set the cooking temperature using the thermostat
knob. For more information on cooking functions, see:
“8. COOKING WITH THE OVEN”.
The timer does not stop the cooking operation. It only warns the user that the preset number of minutes
has passed.
4.1.4 Cooking zone control knob
Standard heating
The circle next to each knob indicates the cooking zone it controls. To switch a zone
on, press the knob and turn it to the required position. Adjustment is continuous so
that the appliance also operates at any intermediate value. To switch off a zone,
return the knob to 0.
Double heating
The circle next to each knob indicates the cooking zone it controls. To switch the
inner cooking zone on, press the knob and turn it to the required position.
To switch on both the inner and outer zone, turn the knob to
/
; and then
release. The knob will return to the maximum intensity position for the hot plate. To
adjust the heat intensity, turn the knob anti-clockwise to the 0 position. To go back to
heating the inner zone only, reset the knob to 0 then turn it to the required position.
To switch off, return the knob to 0.
2
3
4
1
