Warning:
To avoid an electric shock, unplug the unit when replacing the
energy-saving lamp.
The lamp base is E27; the rated power of the lamp is 11W. Use a lamp of the
same rating and size when replacing an energy-saving lamp. Remove the
screw at the back of the lamp cover, then, to release the cover, push it firmly
backward and then carefully pull down. Replace with the same size and type
of the lamp and fix the cover back into place.
Replacement of the fuse on the PCB controller
Warning:
To avoid an electric shock, unplug the unit when replacing the fuse.
We strongly recommended that any servicing be performed by a qualified
individual, or by the manufacturer or its service agent.
There is a fuse on the PCB controller located at the backside of the unit, to cut
off the input voltage when the PCB malfunctions such as overloading or short-
circuiting. The ratings of the fuse are 250V 2A. If this occurs, please replace
the fuse with one having the same ratings and sizes.
Drip Trays
Packed with the unit are two small plastic trays. They should be placed at the
back of each compartment, on the shelf just above the tilted rack. These trays
will catch any water that condenses on the walls of the compartments, and
also helps to maintain the proper humidity level so that corks will not dry out.
Every month or so, they should be checked and emptied if necessary.
Care and Cleaning of Your Wine Cellar
Cleaning the Outside of the Unit
Clean the outside of your unit with mild soapy water. Dry thoroughly with a soft
cloth. To clean the door gasket, use only mild soapy water. Never use harsh
detergents or scouring pads to clean any part of your cooler.
10
