OPERATING INSTRUCTIONS
Turning the Unit On
The unit turns on automatically when it is plugged in.
If you want to use the Automatic Temperature (default) setting, do nothing
further. The unit will automatically set the temperature in the wine
compartment at 13 degrees Celsius and the beverage compartment at 5
degrees Celsius. If you want to set another temperature, see below.
Temperature Setting
To adjust the temperature, press the SET button, and then use the UP/DOWN
keys to navigate to the preferred temperature. When the correct temperature
appears in the LCD Display Window of the Control Panel, press SET to
confirm. Remember that each compartment has separate controls so you will
need to set the temperature in both compartments separately.
Please Note:
Cold air sinks and warm air rises, and there will be a small temperature
variation from the bottom of the unit to the top. The temperature gauge is
located in the middle of the unit and records the temperature at the middle of
the unit. The temperature at the bottom of the unit will always be slightly colder.
Operating The Internal Lights
Each compartment has an internal light to make it easier for you to see the
beverages you have stored. To turn these lights on or off, simply use the
ON/OFF button located on the left side of the control panel.
Please Note:
The internal lights should not be left on for prolonged periods of
time, as the heat generated can raise the temperature of the stored beverages.
Compressor Run Indicator
When your unit’s compressor is running, either one or both control panels will
display moving icons representing a running fan. If the compressor stops
running, the icons will stop moving as well.
Memorizing Temperature Settings.
8
