background image

21

Instructions for the user

10. EXTRAORDINARY MAINTENANCE

The oven requires periodic minor maintenance or replacement of parts subject to wear, such as gaskets,
light bulbs, etc. Specific instructions for each operation of this kind are given below.

Before any intervention that requires access to live parts, disconnect the appliance from the
power supply.

CAUTION: For your safety, you are advised to wear protective gloves while performing any
cleaning or extraordinary maintenance.

10.1 Replacing the light bulb (main oven)

If a light bulb needs to be replaced because it is worn
or burnt out, remove the guide frames; see “9.5.1
Removing guide frames
”.
Then remove the bulb cover using a tool (e.g. a
screwdriver).
Remove the bulb by unscrewing (filament bulbs) or
pulling it (halogen bulbs) in the indicated direction.
Replace the bulb with one of the same type (25W for
filament bulbs or 40W for halogen bulbs).

Do not touch halogen bulbs directly with your fingers, wrap them in insulating material.

10.2 Replacing the light bulb (auxiliary oven)

If a light bulb needs to be replaced because it is worn
or burnt out, unscrew the bulb cover. Remove the bulb
by unscrewing it and then replace it with a similar bulb
(25W).

Содержание SUK62CBL8





























Отзывы: