background image

Use

55

EN

•  With the Grill function, we recommend 

that you turn the temperature knob to the 
maximum value near the symbol 

 to 

optimise cooking.

•  Foods should be seasoned before 

cooking. Foods should also be coated 
with oil or melted butter before cooking.

•  Use the oven tray on the first bottom shelf 

to collect liquids produced by grilling.

•  Grilling processes must never last more 

than 60 minutes.

Advice for cooking desserts/pastries and 
biscuits

•  Use dark metal moulds: They help to 

absorb the heat better.

•  The temperature and the cooking time 

depend on the quality and consistency 
of the dough.

•  To check whether the dessert is cooked 

right through: At the end of the cooking 
time, put a toothpick into the highest point 
of the dessert. If the dough does not stick 
to the toothpick, the dessert is cooked.

•  If the dessert collapses when it comes 

out of the oven, on the next occasion 
reduce the set temperature by about 
10°C, selecting a longer cooking time if 
necessary.

•  While cooking desserts or vegetables, 

excessive condensation may form on the 
glass. In order to avoid this, open the 
door very carefully a couple of times 
while cooking.

Advice for defrosting and proving

•  Place frozen foods without their 

packaging in a lidless container on the 
first shelf of the oven.

•  Avoid overlapping the food.
•  To defrost meat, use the rack placed on 

the second level and a tray on the first 
level. In this way, the liquid from the 
defrosting food drains away from the 
food.

•  The most delicate parts can be covered 

with aluminium foil.

•  For successful proving, a container of 

water should be placed in the bottom of 
the oven.

To save energy

•  Stop cooking a few minutes before the 

time normally used. Cooking will 
continue for the remaining minutes with 
the heat which has accumulated inside 
the oven.

•  Reduce any opening of the door to a 

minimum to avoid heat dispersal.

•  Keep the inside of the appliance clean 

at all times.

Содержание SNLK916MFA9







































Отзывы: