background image

 

 

Instructions for the user

 

 

 

35 

8.

 

LEANING AND MAINTENANCE 

 

 

 

 

 

Before any intervention, disconnect the power supply of the device.

 

 
 

8.1

 

Cleaning 

 

 

 

 

 

Clean the cooking top regularly every time you use it, obviously after it 
has cooled. 

 

8.1.1

 

Regular daily cleaning of the hob 

In order to clean and preserve the surface, always use specific products 
only, which do not contain abrasive substances or chlorine-based acid 
substances. 
How to use: pour the product on a damp cloth and wipe the surface, 
rinse thoroughly and dry with a soft cloth or deerskin. 

 

8.1.2

 

Food stains or residues 

Do not use metallic sponges or sharp scrapers: they will 
damage the surface. 
Use normal non-abrasive products and remove spots or 
residuals with non-scratch sponges or, if need be, with wood or 
plastic utensils. 
Rinse thoroughly and dry with a soft cloth or deerskin. 

 

 

 

 

8.2

 

Cleaning of cooking hob components 

Grids, caps, flame cap crowns and burners can be 
removed for ease of cleaning. Wash them in warm 
water using a non-abrasive detergent, taking care 
to remove all tough spots. Before remounting, allow 
the components to fully dry out

 

 

 

 

CAUTION: do not wash these components in a dishwasher. 

 
 

Содержание SNL97BXG


















Отзывы: