background image

Use

67

EN

3.2 Precautions

A gas leak can cause an explosion.

If you smell gas or there are faults in the gas 
system:
•  Immediately turn off the gas supply or 

close the valve on the gas cylinder.

•  Extinguish all naked flames and 

cigarettes.

•  Do not turn on power switches or 

appliances and do not remove plugs 
from power sockets. Do not use phones 
or mobile phones inside the building.

•  Open the window in order to ventilate 

the room.

•  Call customer assistance services or your 

gas supplier.

Malfunctions

Any of the following indicate a malfunction 
and you should contact a service centre.
•  Damage to kitchen utensils.
•  The burners do not ignite properly.
•  It is difficult to keep the burners lit.
•  The burners go out when the appliance 

is in use.

•  It is difficult to turn the gas valves.
If the appliance does not work properly, 
contact your local Authorised Service 
Centre.

3.3 First use

1. Remove any protective film from the 

outside or inside of the appliance, 
including accessories.

2. Remove any labels (apart from the 

technical data plate) from accessories.

3. Remove and wash all the appliance 

accessories (see 4 Cleaning and 
maintenance).

High temperature

Danger of fire or explosion

•  Do not use or leave flammable materials 

near the appliance or directly 
underneath the hob.

•  Do not cook in closed tins or containers, 

plastic kitchenware or containers.

•  In case you notice cracks or fissures or 

you cannot turn off the appliance, 
disconnect the power supply and 
contact the Assistance Centre.

Содержание PM3621WLD



















































Отзывы: