background image

Safety instructions

30

3. SAFETY INSTRUCTIONS

REFER TO THE INSTALLATION INSTRUCTIONS FOR THE SAFETY REGULATIONS FOR
ELECTRIC OR GAS APPLIANCES AND VENTILATION FUNCTIONS.
IN YOUR INTERESTS AND FOR YOUR SAFETY IT HAS BEEN ESTABLISHED  BY LAW THAT THE
INSTALLATION AND SERVICING OF ALL ELECTRICAL APPLIANCES IS TO BE CARRIED OUT BY
QUALIFIED PERSONNEL IN ACCORDANCE WITH THE REGULATIONS IN FORCE.
OUR REGULAR INSTALLERS GUARANTEE A SATISFACTORY JOB.
GAS OR ELECTRIC APPLIANCES MUST ALWAYS BE DISCONNECTED BY SUITABLY SKILLED
PEOPLE.

BEFORE THE APPLIANCE IS PUT INTO OPERATION, THE PROTECTIVE FILMS APPLIED INSIDE

OR OUTSIDE MUST BE REMOVED.

IMMEDIATELY AFTER INSTALLATION, CARRY OUT A QUICK TEST ON THE APPLIANCE
FOLLOWING THE INSTRUCTIONS PROVIDED LATER IN THIS MANUAL. SHOULD THE
APPLIANCE NOT FUNCTION CALL THE NEAREST TECHNICAL ASSISTANCE CENTRE. NEVER
ATTEMPT TO REPAIR THE APPLIANCE.

THIS PRODUCT IS FACTORY SET FOR THE USE OF LPG GAS 

SOLD IN APPROPRIATE

CYLINDERS AT AUTHORISED CENTRES. SHOULD IT BE NECESSARY TO USE A DIFFERENT
TYPE OF GAS, YOU MUST CONTACT THE NEAREST AUTHORISED SERVICE CENTRE.

A GAS CYLINDER, EVEN IF IT APPEARS TO BE EMPTY, MUST ALWAYS BE HANDLED WITH
CARE AND IN COMPLIANCE WITH THE SAFETY RULES PROVIDED WITH THE INSTRUCTION.
NEVER USE GAS CYLINDERS WITH DENTS OR RUSTED ZONES.

NEVER USE A FLAME TO CHECK THAT GAS IS FLOWING CORRECTLY OUT OF THE BURNERS,
OR TO SEARCH FOR ANY GAS LEAKS IN THE APPLIANCE.

DO NOT KEEP A SPARE CYLINDER IN THE VICINITY OF THE APPLIANCE.

NEVER DISCONNECT THE CYLINDER FROM THE PRODUCT WHILE THE PRODUCT IS
FUNCTIONING AND IN ANY CASE ALWAYS KEEP AT A DISTANCE FROM THE PRODUCT FOR
ANY OPERATION INVOLVING THE CYLINDER.

NEVER PLACE 

PANS OR CONTAINERS WITH BOTTOMS WHICH ARE NOT PERFECTLY FLAT

AND SMOOTH ON THE HOB GRIDS.

THE APPLIANCE BECOMES VERY HOT DURING USE. OVEN GLOVES SHOULD BE WORN IN
ORDER TO AVOID BURNS. 

NEVER USE 

PANS OR GRIDDLE PLATES WHICH PROJECT BEYOND THE OUTSIDE EDGE OF

THE HOB.

NEVER REST INFLAMMABLE OBJECTS ON THE PRODUCT: IF IT SHOULD ACCIDENTALLY BE
SWITCHED ON, THIS MIGHT CAUSE A FIRE.

DURING USE THE APPLIANCE BECOMES VERY HOT.

 TAKE CARE NEVER TO TOUCH THE

HEATING ELEMENTS INSIDE THE APPLIANCE.

THE APPLIANCE IS DESIGNED FOR USE BY ADULTS

. DO NOT ALLOW CHILDREN TO GO NEAR

IT OR PLAY WITH IT.
WHEN THE PRODUCT IS FUNCTIONING IT MAY BECOME VERY HOT: 

KEEP CHILDREN AWAY

.

ALWAYS CHECK THAT THE CONTROL KNOBS ARE IN THE (OFF) POSITION WHEN YOU FINISH
USING THE APPLIANCE.

Содержание MC30RA

























Отзывы: