background image

Instructions for the User

32

4. INTENDED USE OF THE APPLIANCE

The appliance was designed specifically for 

domestic outdoor use,

 

and is therefore suitable for

cooking and heating food. The appliance was not designed and manufactured for professional use.
Smeg declines all responsibility for damage arising from incorrect use of the appliance.

THIS APPLIANCE MAY ONLY BE USED OUTDOORS IN THE PRESENCE OF NATURAL
VENTILATION, OUTSIDE ANY STAGNANT AREAS, WHERE GAS LEAKS AND COMBUSTION
PRODUCTS CAN BE RAPIDLY DISPERSED BY THE WIND AND BY THE NATURAL CONVECTION
OF THE AIR.

4.1 Examples of outdoor use

Any delimited area in which the appliance is positioned must comply with the
following requirements:

•  An area delimited by walls on all four sides, but with at least one permanent

opening on the ground and no roof covering.

•  Inside a delimited area that includes a roof covering but which has no more

than two walls.

•  With a partial closure that includes a roof covering but no more than two walls

with the following restrictions:

     At least 25% of the total surface area of the wall must be completely
     open.
     At least 30% of the remaining surface area is open and not delimited.

•  In the case of terraces, at least 20% of the total surface areas of the walls,

back and front, must be open.

Содержание MC30RA

























Отзывы: