E n g l i s h
|
9
CLEANING: GENERAL RULES
Disconnect electrical power from the appliance and w ait until the device is cooled completely before
cleaning.
WARNING: the appliance should never be cleaned with high pressure water sprays.
ORDINARY CLEANING OF CHAMBER
It is advisable to clea n the chamber daily so as to ma
intain corre ct levels of hygiene and avoid th e
deterioration of steel.
Do not use high pressu re water steam lances or steamers for cleanin g. Acidic, a brasive, corrosive sand-
based or caustic soda based detergents are prohibited.
For manual cleaning follow the procedure below:
•
Turn on the appliance and set the temperature to 60°C.
•
Leave it on for 10 minutes on steam
•
Turn off the appliance and let it cool down
•
Clean with hot water and soap then rinse.
Only use products recommended by the manufacturer of the appliance.
EXTERNAL CLEANING
Only use a damp cloth with warm water or pro ducts suitable for cleaning stainless steel. Do n ot use acidic
products or ammonia.
WARNING: the appliance should never be cleaned with high pressure water sprays.
IV. EXTRAORDINARY MAINTENANCE
It is advisable to have the appliance subjected to periodical checks (at l east once per year) by a specialized
authorized technician.
Any maintenance, inst allation or r epair work must be carried out by qualified a
uthorized p ersonnel by
contacting the Assistance Centre. Before carrying out any operation the appliance must be plugged out at the
mains, turn off the water mains taps and wait for it to cool down.
Before moving the appliance from p osition, check that the electricity and water co nnections (electric cables
water pipe and drainage) are correctly plugged out.
If the appliance is on wheels check that electric cables, pipes or anything else are not damaged while moving
it. Ensure the break is on. Avoid placing the device near heat (such as fryers etc.).
After carrying out the task and repla cing the appliance in its initial position, check that the electric and wate r
are connected correctly.
V. MAINTENANCE IN CASE OF BREAKAGE
If the appliance breaks, disconnect it from the mains and turn off water.
Before ringing Customer Service, check the chart below).
PROBLEM
CAUSE
SOLUTION
The leavening cabinet isn’t
heating
Supply voltage failure
Restore power supply voltage
Incorrect connection to the power
supply network
Check connection to the power supply network
Broken resistance
Contact specialised technician for repair
(Assistance Service ).
Broken thermostat temperature
Contact specialised technician for repair
(Assistance Service ).
