Smeg LB86, Инструкция по эксплуатации

Страница: 4 / 32

150241
150241
•
Be sure to remove transport brackets prior first use
of the appliance. Attempted operation of the blocked
machine may result in irreparable damage which is
not covered by the manufacturer’s warranty!
•
When connecting your washing machine to water
supply, be sure to use brand new water inlet hose
and appropriate sealing gaskets (attached).
•
Do not locate the machine in a room with
temperature below 0°C. Parts of the machine may
be damaged if frozen.
•
Install the washing machine in a perfectly
horizontal position, on solid flat concrete floor.
•
Follow the instructions for correct installation and
water and mains connections.
•
Never immerse the end of the drain hose into the
draining water.
•
Prior starting the washing cycle lock the door by
pressing them at the designed spot.
•
Door may not be open during the washing cycle.
•
Use only detergents and softeners for machine
wash. Manufacturer may not assume responsibility
for any damage and eventual discoloring of
gaskets and plastic components as a consequence
of incorrect use of bleach and/or coloring agents.
•
For removal of lime residues use such agents
with added anti-corrosion agents. Follow the
manufacturer’s instructions. Finish the lime
removal by multiple rinsing to remove completely
eventual acid residues.
•
Never use detergents containing solvents, since
there is a danger of creating toxic gasses which
may damage the machine and result in ignition or
explosion.
•
Upon completion of washing operation close the
water faucet.
•
Before any transport block the machine by
inserting at least one transport blocking rod. Prior
this operation disconnect the appliance from the
mains power!
4
5
Cautions