150241
150241
•
Put the appliance in horizontal position by turning
the adjustable legs.
The legs are adjustable up to +/- 1 cm.
The floor below the appliance should have
concrete base, and must be dry and clean,
otherwise the appliance may slide.
•
If you have a tumble dryer of the same
dimensions, you can place it on top of the
washing machine.
To ensure correct operation of the appliance,
water pressure inlet must be between 0,05 and
0,8 MPa.
Minimum water pressure can be established
by measuring the quantity of poured out water.
3 litres of water must be poured out from
completely opened tap in 15 seconds.
•
Insert the gasket with screen into the water inlet
hose thread Screw the hose thread to the water
faucet
•
In case of hot and cold water connection, connect
one hose to cold and other to hot water faucet as
marked at the rear of the appliance (letters C and H)
(C - cold; H - hot)
6
7
Water inlet connection
Leveling the appliance
Содержание LB86
Страница 1: ...Instructions for Use Washing machine ...
Страница 30: ...150241 30 ...
Страница 31: ......
Страница 32: ...PS PG2 OEM SMEG 150241 en 02 06 ...