20
Microwave Maintenance
Cleaning
MAKE SURE THAT THE MICROWAVE IS
UNPLUGGED
BEFORE
CLEANING
THE
MICROWAVE.
DON'T USE ABRASIVE CLEANING PRODUCTS.
OUTSIDE
1. Clean the outside surface with a neutral
detergent, warm water and dry it with a damp
cloth.
2. Avoid water from entering the Microwave
ventilation holes.
INSIDE
1. Clean the Microwave walls with a damp cloth
after each use.
2. Avoid water from entering the ventilation holes
in the Microwave's interior.
3. If some time has passed by since the last
cleaning and the Microwave's interior is dirty,
place a glass of water on the tray and switch
on the Microwave for 4 minutes on the highest
setting. Moisture will form on the Microwave
walls that will be easily cleaned.
4. The tray can be washed with regular dish
washing detergent or in the dishwasher.
DOOR, DOOR SEAL, AND MICROWAVE FRONT
1. These parts should always be clean,
especially the contact surface between the
door and the Microwave front, to prevent
microwave leakage.
2. Use neutral detergent, warm water and dry the
surface with a soft cloth.
Light Replacement
In some models the light may be replaced by the
user. These Microwaves have a lid on the left-
hand side.
To replace the light, do as follows:
1. Unplug the Microwave;
2. Remove the lid from the light compartment;
3. Replace the light bulb for a new one (25 W);
4. Replace the lid.
WARNING: in the models without the lid to
replace the light bulb, this should be done by
the Technical Assistance Service because
special tools are required.
