CWC 611
20
11 MALFUNCTIONS SHOWN ON THE DISPLAY (FOR THE USER)
The dishwasher is able to identify a number of malfunctions and show them on the display. If the problem persists after the
dishwasher has been switched off and back on, proceed as described below:
ERROR
POSSIBLE CAUSE
POSSIBLE REMEDY
Er 04
Tank temperature probe malfunction
Contact the After-Sales Service
Er 05
Tank water filling malfunction
Check that the water intake tap is on and the dynamic pressure in
intake system, inspect water intake filter and clean if necessary. If
the problem persists, contact the After-Sales Service.
Er 06
Water not pumped out of tank.
Inspect the filters dirt that the drain hose is not blocked, bent or
crushed. Check that the drain pump is not blocked by dirt by
removing the insert on the sump (from inside the tank ).
If the problem persist:
With the tank empty: tank pressure switch defect (the contact is
locked on full)
With tank full: drain pump has failed.
Er 23
Boiler heating malfunction (does not
heat up)
Contact the After-Sales Service.
Er 24
Boiler temperature probe malfunction
Contact the After-Sales Service.
Er 25
Boiler water filling malfunction
Check that the water intake tap is on and the dynamic pressure in
intake system, inspect water intake filter and clean if necessary. If
the problem persists, contact the After-Sales Service.
Er 26
Boiler emptying malfunction
Check that the rinsing spray arm nozzles are not fouled
If the problem persists, contact the After-Sales Service.
Er 27
Boiler emptying malfunction – with tank
full
Contact the After-Sales Service.
