Installation
132
Connection with a steel hose with conical
fitting
Make the connection to the gas mains
using a continuous wall steel hose whose
specifications comply with the applicable
standard.
Carefully screw the hose connector
3
to the
appliance’s gas connector
1
(½” thread
ISO 228-1), placing the supplied seal
2
between them. Apply insulating material to
the thread of connector
3
, then tighten the
steel hose
4
to the connector
3
.
Connection to LPG
Use a pressure regulator and make the
connection on the gas cylinder following
the guidelines set out in the standards in
force.
The supply pressure must comply with the
values indicated in the table in “Burner and
nozzle characteristics tables”.
Gas connection extension cord
(pyrolytic models only)
For pyrolytic models, the supplied gas
connection extension cord must be
installed:
1. undo the screw
A
at the back of the
appliance, under the gas connection.
2. Use the just removed screw
A
to fasten
the supplied bracket
B
to the back of
the cabinet.
Содержание CPF9GMAN
Страница 74: ......
