background image

Use

108

Sabbath

1. Press and turn the function knob to select 

the Sabbath function 

.

2. Press and turn the temperature knob to 

modify the temperature of the function.

3. Press the temperature knob to confirm the 

set temperature. 

 flashes.

4. Press the function knob to start the 

Sabbath function.

5. Press and hold the function knob for at 

least 3 seconds to exit the function.

This function allows food to be 
cooked in accordance with the 
provisions of the Jewish religion 
day of rest.

This function results in the 
appliance operating in a particular 
way:

•  Cooking can proceed 

indefinitely, it is not possible to 
set any time.

•  No preheating will be 

performed.

•  The cooking temperature which 

can be selected varies between 
60-100 °C.

•  Oven light disabled, any 

operation such as opening the 
door or manual activation with 
the knob will not activate the 
light.

•  The internal fan remains turned 

off.

•  Knob illumination and audible 

prompts remain disabled.

After activating the Sabbath 
function the settings cannot be 
altered. 
Any action on the knobs will 
produce no effect; only the 
function knob remains active to 
allow the appliance to be turned 
off.

Содержание CPF9GMAN











































































Отзывы: