Instructions for the user
37
9. USING THE BARBECUE
9.1 Insertion and replacement of the battery
Models in this range are equipped with a compartment for a 9 V (3LR61) battery,
which lights the burner igniters.
To insert or replace the battery, follow the instructions provided below, referring
to the drawing:
• remove the dripping pan;
• access the battery compartment through the opening in the front panel (see
diagram);
• using the tool provided, detach panel
A
from the box with the battery door;
• replace the battery
B
with one of the same type;
• put the battery back into its housing and close the panel;
Warning: Used batteries may not be dumped in the environment or thrown out with other objects. They
must be collected separately and brought to the local company authorised for refuse disposal or
disposed of in suitable used battery collection containers.
9.2 Fitting and using the rotisserie motor
The rotisserie motor is supplied dismantled. To fit it, simply
screw the two screws (supplied) into the holes provided on
the right-hand side of the barbecue.
Line up the holes in the barbecue (ref.
A
) with the holes in
the rotisserie motor (ref.
B
). Then screw in the two screws
to join the two parts together. (See diagram on the right.)
To use the rotisserie motor, simply connect the plug to the
electrical mains and set the switch on
I
to turn it on
.
To
switch it off, simply return the switch to
0.
Before connecting the rotisserie motor to the electrical mains, make sure the mains voltage type
corresponds with the information provided on the plate on the rotisserie motor.
CAUTION: do not expose the rotisserie motor to bad weather as this could damage the device
and reduce its safety level. If necessary, remove the device from the barbecue by unscrewing its
fixing screws and store it in a place protected from the weather.
CAUTION, in case of damage to the rotisserie motor power supply cable, do not attempt to repair
or replace it yourself; contact an authorised service centre immediately.
Disconnect the plug from the electrical mains before cleaning the rotisserie motor. Do not place the
rotisserie in water to clean it.
