EN - 16
Problem
Possible causes
Solution
All buttons flash
simultaneously.
Hydraulic circuit error.
Make sure there is water
in the tank and wait for the
circuit to reset. The machine
automatically returns to
its initial position. If the
problem persists, contact an
authorised service centre.
The machine does not
dispense steam.
The steam function was not
correctly turned on.
Follow the instructions
in paragraph “Steam
dispensing”.
The machine did not reach
the steam dispensing
temperature.
Wait until the temperature is
reached, indicated by steady
lit key 19
.
Insufficient frothing.
The steam wand is dirty.
Thoroughly clean the steam
wand removing the steel
nozzle and following the
instructions in the manual.
Note: froth quality also
depends on the type of
milk used.
Contact local technical support if the problem is not solved or in case of other types
of faults.
